Operational safety belt conveyor and other considerations
A belt in the belt official driver before departure , each belt should be a point to open and no-load operation. After trial operation is correct, the entire belt conveyor lines
one by one starting at countercurrent direction belt . The belt conveyor belt and then start caving , such as a pile of coal on the belt foreground , the background belt
Allowed to continue to move Plastic belt conveyor forward starting load .
2 , the belt is strictly prohibited and transported by beams and large metal gate materials and weight of large equipment.
3 , the belt should be adjusted if any deviation phenomenon . Ministries sound normal, no jamming , ministries temperature is normal , usually bearing not exceed 70 ℃, gearbox
temperature 90 degree turn conveyor does not exceed 50 ℃.
4 , belt driver may not leave the belt running nose or tail , in addition to the head and tail belt for cleaning , shall not do has nothing to do with the belt running strictly
prohibited sleeping or reading.
5 , the driver must be in before work was finished on the belt of coal , coal storage may not have left in the belt conveyor , switch to fight in the stop position . On the gear
box, motors, switches for cleaning wipe , belt head floating around the cargo cleaned.
6 , good belt run record.